Electro-Voice ZX1-90b 8" 2-way, 90 X 50 Indoor/Outdoor Portable Loudspeaker System

MSRP: $386.50 You save $87.50 at NorrisAV.com! Have you seen it elsewhere for less? Call us at 888-667-7474 to take advantage of our low-price guarantee!

Designed for top-notch quality with amazing versatility, the ZX/ZXA series sets a new standard of performance and practicality in sound reinforcement loudspeakers. Featuring high-end components and lightweight molded enclosures, the ZX/ZXA line is at home in any installed or portable application, from commercial sound to clubs, HoW, stages, arenas, and stadiums. Newly-designed highpower woofers and drivers ensure full-range sound with awesome richness and clarity. Sleek contemporary styling fits in anywhere. Light weight makes transport easy while enabling a multitude of flying and mounting options that are each supported by innovative mechanical solutions. Whether for portable use or permanent installation, the ZX/ZXA series represents the next level in advanced loudspeaker technology.

• Extremely Smooth, Wide Frequency Response • Attractive, Clean Design with Full Grille • EV8L 8” High-Output LF Transducer • DH2005 1” Exit True Compression Driver • 90° x 50° Coverage Pattern • Rotatable Horn Design • Integral Monitor Angle on Enclosure • 200W Cont., 800W Peak Power Handling • High Sensitivity, 123 dB Maximum SPL • Built-In Pole Mount • Integral Handle Pocket for Easy Carrying Freq. Response1 (-3 dB): 60 Hz - 20 kHz Freq. Range1 (-10 dB): 48 Hz - 20 kHz Rec. Hipass Frequency: 40 Hz Axial Sensitivity1: 94 dB (1W/1m) Max Calculated SPL: 123 dB Horizontal Coverage: 90° or 50° Vertical Coverage: 50° or 90° Rated System Power: 200W Cont.2, 400W Prog., 800W Peak LF Transducer: EV8L, 8 in (203mm) Driver HF Transducer: DH2005, 1 in. (25.4mm) Exit Compression Driver Crossover Frequency: 1.7 kHz Nominal Impedance: 8 Ohms Minimum Impedance: 6 Ohms Connectors: Neutrik Speakon NL4 Enclosure Material: High Impact Polymer Grille: Polyester Powder Coated, 18GA Galvanized Steel Dim (H x W x D): 457mm x 282mm x 264mm (17.98" x 11.12" x 10.38") Net Weight: 8.4 kg (18.5 lbs) Shipping Weight: 10.2 kg (22.5 lbs) 1 Half Space Measurement. 2 IEC Noise, 6 dB Crest Factor. The Electro-Voice® ZX1 is the new standard of no compromise audio performance and versatility for compact sound reinforcement. The high-tech enclosure uses injection-molded high-impact polypropylene to make the ZX1 extremely durable. The enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small loudspeakers and enables exceptional low frequency response without vent noise. The ZX1’s long excursion, high output 8" woofer with a weatherized treated cone delivers smooth low frequency performance with exceptional reliability. A sophisticated crossover network integrates it with the DH2005, a 1.25” voice coil titanium diaphragm true compression driver for maximum output with extended frequency response. Full-bandwidth overload protection is provided for reliable, long term operation without audible effect. The horn features 90° x 50° coverage with the important added benefit of rotation, allowing the ZX1 to be oriented either horizontally or vertically for the ultimate in coverage flexibility. The ZX1’s molded polymer enclosure is inherently water resistant. The enclosure features an integrated pole mount, a pocket handle, and a wedge-angle design allowing for use as a stage

• Smooth, wide frequency response
• Ideal for mains, fills, or monitors
• Velocity-compensated port for exceptional LF
• Long-excursion weather-treated EV8L woofer
• 1.25-inch DH2005 titanium HF compression driver
• Rotatable 90º x 50º horn for flexible coverage
• Passive crossover with full-band overload protection
• High sensitivity, 123 dB maximum SPL
• Power handling: 200 W continuous, 800 W peak
• High-impact polypropylene enclosure
• Compact monitor-friendly wedge shape
• Integrated pole mount adapter and pocket handle
• Metric mounting inserts (4)
• Available in black or white

 

Chassis Size	203.2 mm (8")
Color	Black
Input Connections	Parallel Neutrik® NL4
Speaker Type	Fullrange, Mid-High, Two-Way, Wedges
Frequency Response (-3 dB)	60 - 20000 Hz
Frequency Response (-10 dB)	48 - 20000 Hz
Internal Crossover	Yes
Recommended High-Pass Frequency	40 Hz
Sensitivity 1 W/1 m	94 dB
Max. SPL/1m (calc)	123 dB
Coverage (Nominal -6 dB) H	90 ° Rotatable
Coverage (Nominal -6 dB) V	50 ° Rotatable
Rotatable Horn	Yes
System Power Handling (Continuous/Program/Peak)	200//800 Watts
LF Transducer	8-inch EV8L
HF Transducer	1.25-inch DH2005
Crossover Frequency	1700 Hz
Nominal Impedance (Passive)	8 Ω
Minimum Impedance	6 Ω
Enclosure Material	High Impact Polystyrene
Flying	No
Outdoor	No
Grill	Polyester Powder Coated, 18GA Galvanized Steel
Height	457 mm (17.99")
Width	282 mm (11.1")
Depth	264 mm (10.39")
Weight Net	8.4 kg (18.52 lbs)

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: