Aviom Mix4 Four Mix Personal Mixing System

Brand: Aviom, Inc.
Product Code: Mix4
Availability: 2 - 3 Days

Price: $4,399.00

Qty: - OR - Add to Wish List
Add to Compare

0 reviews | Write a review

Description Reviews (0) Related Products (5)

Aviom Mix4 Four Mix Personal Mixing System

The Mix4 is a complete monitor mixing system for four performers. It easily connects to any analog console using the console's line-level outputs, direct outs, aux sends, groups, or busses.

Once the input signals are connected to the AN-16/i Input Module, run the included Cat-5e cable from the AN-16/i to the A-16D Pro A-Net Distributor which copies and splits the digital signal while at the same time adding DC power to each of its eight outputs.

Connecting a Cat-5e cable from the A-16D Pro to each A-16II Personal Mixer is all that is necessary to set up the system; the mixers get their power over the same cable that delivers the 16-channel digital signal. Plug headphones, ear buds, or an in-ear monitoring system into the Personal Mixer and you're ready to start creating custom mixes.

As with all Aviom personal mixing systems, this four-mix package can be expanded as needed to include more Personal Mixers at any time.

The system's head end includes an AN-16/i v.2 Input Module which accepts up to 16 line-level inputs. Audio is converted to digital and transmitted via A-Net^®, up to 500ft/150m over Cat-5e. A dedicated audio thru is available for each input channel, allowing the AN-16/i v.2 to be seamlessly inserted into an existing audio signal path.

The 16-channel A-16II Personal Mixer allows a performer to create and save up to 16 custom mixes, and gives each performer control over channel volume, grouping, pan, stereo spread, along with master volume and tone. The system also includes an MT-1a for each Personal Mixer to allow the mixer to be mounted on any standard mic stand.

The A-16D Pro A-Net Distributor eliminates the need to daisy chain Personal Mixers, and simplifies set-up by eliminating the need to connect a power supply to each mixer. The A-16D Pro accepts one Pro16 A-Net input signal and provides nine parallel outputs, using rugged EtherCon connectors and standard Cat-5e cables. The A-16D Pro provides isolated (floating ground) DC power through the eight A-Net Outs; the ninth output is an unpowered A-Net Thru connector, designed for distributing a copy of the A-Net signal to a second A-Net Distributor or remote location.

As with all Aviom personal mixing systems, this four-mix package can be expanded as needed to include more Personal Mixers at any time.

Mix4D Technical Specifications

AN-16/i v.2 Input Module
Audio Inputs	16, balanced line-level, 1/4-inch TRS connector
Inputs	Tip: Audio +; Ring: Audio -; Sleeve: Ground
TRS Thru	Impedance matched output
Analog to Digital Conversion	48kHz sample rate, 24 bit
Frequency Response	4Hz-22kHz
A- Net In	One Category 5 (RJ45 connector) Four-position slot range selector switch for use with Pro16e A-Net
A-Net Out	One Category 5 (RJ45 connector) Supports Pro16 and Pro16e
Gain Settings	Four-position switch, -10dBv, 0dBu, +4dBu, and +22dBu
Channel LED Indicators	Signal Present and Clip, per channel
Line Inputs	Impedance: 48k ohms
Metering	LEDs; green: Signal Present, red: Clip; per channel
Stereo Operation	Stereo Link, per channel pair; Two-position switch (Normal, Link)
Maximum Input Level	+22dBu
Input Impedance	17.8k ohm
Freq. Response	4Hz-22kHz +0.2dB/-3dB
THD +N	< 0.003%
Crosstalk	-90dB
Bit Error Rate (BER)	10(-12)
Signal to Noise (unweighted)	90dB typical, A/D to D/A Measured from AN-16/i to AN-16/o Output Module
Digital Outputs	A-Net: 1; RJ45 connector
A-Net Pro16 and Pro16e	Use unshielded Cat-5e UTP (or better) cable
Latency	<0.880 msec (measured from analog input to analog output)
Power Supply Input Voltage Output Voltage Plug Size	External, DC, universal switching type 100-240 volts, 50/60Hz, 30VA 18-24 VDC, 0.5 amp 2 mm
Power	18-24 VDC, 500mA
Dimensions	19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high
Weight	6.8 lb (3.08 kg)
Options	AN-16SBR System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable

A-16II Personal Mixer
Audio Output	1/4-inch TRS stereo, headphone or line level
Line/Headphone TRS Output	Tip: Audio Left; Ring: Audio Right;Sleeve: Ground Auto-detects mono plugs
A-Net Input/Output	1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector)
Digital to Analog Conversion Bit Depth	24 bit
Signal to Noise Ratio	(Referenced to 0dB) -103dB
Latency	<0.880 msec (measured from analog input to analog output)
Pro16 A-Net	Uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices
Tone Controls	Treble +/-12dB at 9kHz shelving
Tone Controls	Bass +/-12dB at 160Hz shelving
Maximum Levels (RMS)	Line/Headphone outs: 1.0 watt at 100 ohms
Impedance	Line/Headphone outs: 32 ohms
Power Supply Input Voltage Output Voltage Plug Size	External, DC, universal switching type 100-240 volts, 50/60Hz, 30VA 18-24 VDC, 0.5 amp 2 mm
Dimensions	10.75" (273 mm) wide x 5.6" (142.2 mm) deep; 2.25" (57.5 mm) high
Weight	3.4 lbs. (1.54 kg)
Options	MT-1 Mic Stand Mount (uses 6-32 1/4-inch screws)
	EB-1 Extension Bracket
	MT-X Expansion Box (requires MT-1)

{C}

A-16D A-Net Distributor
A-Net Inputs	One Category 5 (RJ45 connector)
A-Net Outputs	8 Category 5 (RJ45 connector), optionally powered (DC)
Remote DC Power Inputs	8; Rear panel; accepts power supplies from A-16II or A-16R; Size: 2mm
Output Voltage for Personal Mixers	18-24 VDC, 0.5 amp Transmitted over the Cat-5e cable
Main DC Power Input	One; accepts included external DC power supply, universal switching type
LED Indicators	Power On, Yellow
A-Net LED Indicators	A-Net Active, Green
Remote DC Power Active LED	One per A-Net output
Size	8.5" (215 mm) wide x 6.7" (170 mm) deep 1.2" (30.4 mm) high;
Size	Can be rack-mounted on a standard 1U rack accessory shelf (optional)
Weight	2.0 lb (0.91 kg)

MT-1a Mic Stand Mount
Boxed Weight	1 lb
Boxed Dimensions	7"w x 5"d x 3"h
Dimensions	6.25" wide at front x 4.5" wide at rear x 3" high
Connections:	Attaches with three screws to bottom of and A360 A-16II, or A-16CS
Connectors:	Size: 6-32, 1/4-inch long screws