Aviom Mix6 Six-Mix personal Mixing System
The Mix6 is a complete monitor mixing system for six performers. It easily connects to any analog console using the console's line-level outputs, direct outs, aux sends, groups, or busses.
Once the input signals are connected to the AN-16/i v.2 Input Module, run the included Cat-5e cable from the AN-16/i v.2 to the A-16D Pro A-Net Distributor which copies and splits the digital signal while at the same time adding DC power to each of its eight outputs.
Connecting a Cat-5e cable from the A-16D Pro to each A-16II Personal Mixer is all that is necessary to complete the setup; the mixers get their power over the same cable that delivers the 16-channel digital signal. Plug headphones, ear buds, or a wireless in-ear monitoring system into the Personal Mixer and you're ready to start creating custom mixes.
The Mix6 is a complete monitor mixing system for six performers. It easily connects to any analog console using the console's line-level outputs, direct outs, aux sends, groups, or busses.
Once the input signals are connected to the AN-16/i v.2 Input Module, run the included Cat-5e cable from the AN-16/i v.2 to the A-16D Pro A-Net Distributor which copies and splits the digital signal while at the same time adding DC power to each of its eight outputs.
Connecting a Cat-5e cable from the A-16D Pro to each A-16II Personal Mixer is all that is necessary to complete the setup; the mixers get their power over the same cable that delivers the 16-channel digital signal. Plug headphones, ear buds, or a wireless in-ear monitoring system into the Personal Mixer and you're ready to start creating custom mixes.
Video Tutorials
Mix6 ()
- Monitor Mixing
- Digital Snakes
- Audio Networking
Product Details
The Mix6 system's head end includes an AN-16/i v.2 Input Module which accepts up to 16 line-level inputs. Audio is converted to digital and transmitted via A-Net®, up to 500ft/150m over Cat-5e. A dedicated audio thru is available for each input channel, allowing the AN-16/i v.2 to be seamlessly inserted into an existing audio signal path.
The 16-channel A-16II Personal Mixer allows a performer to create and save up to 16 custom mixes, and gives each performer control over channel volume, grouping, pan, stereo spread, along with master volume and tone. The system also includes an MT-1a for each Personal Mixer to allow the personal mixer to be mounted on any standard mic stand.
The A-16D Pro A-Net Distributor eliminates the need to daisy chain Personal Mixers, and simplifies setup by eliminating the need to connect a power supply to each mixer. The A-16D Pro accepts one Pro16 A-Net input signal and provides nine parallel outputs, using rugged EtherCon connectors and standard Cat-5e cables. The A-16D Pro provides isolated (floating ground) DC power through the eight A-Net Outs; the ninth output is an unpowered A-Net Thru connector, designed for distributing a copy of the A-Net signal to a second A-Net Distributor or remote location.
As with all Aviom personal mixing systems, this six-mix package can be expanded as needed to include more Personal Mixers at any time.
Mix6 Technical Specifications
Specs {C}
|
AN-16/i v.2 Input Module
|
| Audio Inputs |
16, balanced line-level, 1/4-inch TRS connector |
| Inputs |
Tip: Audio +; Ring: Audio -; Sleeve: Ground |
| TRS Thru |
Impedance matched output |
| Analog to Digital Conversion |
48kHz sample rate, 24 bit |
| Frequency Response |
4Hz-22kHz |
| A- Net In |
One Category 5 (RJ45 connector)
Four-position slot range selector switch for use with Pro16e A-Net |
| A-Net Out |
One Category 5 (RJ45 connector)
Supports Pro16 and Pro16e |
| Gain Settings |
Four-position switch, -10dBv, 0dBu, +4dBu, and +22dBu |
| Channel LED Indicators |
Signal Present and Clip, per channel |
| Line Inputs |
Impedance: 48k ohms |
| Metering |
LEDs; green: Signal Present, red: Clip; per channel |
| Stereo Operation |
Stereo Link, per channel pair;
Two-position switch (Normal, Link) |
| Maximum Input Level |
+22dBu |
| Input Impedance |
17.8k ohm |
| Freq. Response |
4Hz-22kHz +0.2dB/-3dB |
| THD +N |
< 0.003% |
| Crosstalk |
-90dB |
| Bit Error Rate (BER) |
10(-12) |
| Signal to Noise (unweighted) |
90dB typical, A/D to D/A
Measured from AN-16/i to AN-16/o Output Module |
| Digital Outputs |
A-Net: 1; RJ45 connector |
| A-Net Pro16 and Pro16e |
Use unshielded Cat-5e UTP (or better) cable
|
| Latency |
<0.880 msec (measured from analog input to analog output) |
Power Supply
Input Voltage
Output Voltage
Plug Size |
External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
18-24 VDC, 0.5 amp
2 mm |
| Power |
18-24 VDC, 500mA |
| Dimensions |
19" (482.6 mm) wide x 5.75" (146 mm) deep;
1U high |
| Weight |
6.8 lb (3.08 kg) |
| Options |
AN-16SBR System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable |
{C}
{C}
|
A-16II Personal Mixer
|
| Audio Output |
1/4-inch TRS stereo, headphone or line level |
| Line/Headphone TRS Output |
Tip: Audio Left; Ring: Audio Right;Sleeve: Ground
Auto-detects mono plugs |
| A-Net Input/Output |
1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector) |
| Digital to Analog Conversion Bit Depth |
24 bit |
| Signal to Noise Ratio |
(Referenced to 0dB) -103dB |
| Latency |
<0.880 msec (measured from analog input to analog output) |
| Pro16 A-Net |
Uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices |
| Tone Controls |
Treble +/-12dB at 9kHz shelving |
| Bass +/-12dB at 160Hz shelving |
| Maximum Levels (RMS) |
Line/Headphone outs: 1.0 watt at 100 ohms |
| Impedance |
Line/Headphone outs: 32 ohms |
Power Supply
Input Voltage
Output Voltage
Plug Size |
External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
18-24 VDC, 0.5 amp
2 mm |
| Dimensions |
10.75" (273 mm) wide x 5.6" (142.2 mm) deep;
2.25" (57.5 mm) high |
| Weight |
3.4 lbs. (1.54 kg) |
| Options |
MT-1 or MT-1a Mic Stand Mount |
| EB-1 Extension Bracket |
| MT-X Expansion Box (requires MT-1) |
| PS-120 Power Supply |
{C}{C}
|
A-16D Pro A-Net Distributor
|
| A-Net Input |
One EtherCon RJ45 connector |
| A-Net Thru |
One EtherCon RJ45 connector, unpowered |
| A-Net Outputs |
8 EtherCon RJ45 connectors, powered (DC) |
| LEDs |
Power On; A-Net Active |
| Pro16 A-Net |
16 channels of digital audio over Cat-5e cable |
| Uses unshielded Cat-5e UTP (or better) cable |
| Power Supply |
Internal, universal switching type |
| Cooling |
One ultra-quiet fan |
| Input Voltage |
100-240VAC, 50-60Hz, 60W |
Output Voltage for
Personal Mixers |
18-24 VDC, 0.5 amp |
| Transmitted over the Cat-5e cable |
| Dimensions |
19" (482.6 mm) wide x 14.25" (362 mm) deep; 2U,
3.5" (88.9 mm) high |
| Weight |
12.0 lbs (5.44 kg) |
{C}{C}
|
MT-1a Mic Stand Mount
|
| Boxed Weight |
1 lb |
| Boxed Dimensions |
7"w x 5"d x 3"h |
| Dimensions |
6.25" wide at front x 4.5" wide at rear x 3" high |
| Connections: |
Attaches with three screws to bottom of an A360 A-16II, or A-16CS |
| Connectors: |
Size: 6-32, 1/4-inch long screws |
{C}
Video Tutorials
Mix6 ()
- Monitor Mixing
- Digital Snakes
- Audio Networking
Product Details
The Mix6 system's head end includes an AN-16/i v.2 Input Module which accepts up to 16 line-level inputs. Audio is converted to digital and transmitted via A-Net®, up to 500ft/150m over Cat-5e. A dedicated audio thru is available for each input channel, allowing the AN-16/i v.2 to be seamlessly inserted into an existing audio signal path.
The 16-channel A-16II Personal Mixer allows a performer to create and save up to 16 custom mixes, and gives each performer control over channel volume, grouping, pan, stereo spread, along with master volume and tone. The system also includes an MT-1a for each Personal Mixer to allow the personal mixer to be mounted on any standard mic stand.
The A-16D Pro A-Net Distributor eliminates the need to daisy chain Personal Mixers, and simplifies setup by eliminating the need to connect a power supply to each mixer. The A-16D Pro accepts one Pro16 A-Net input signal and provides nine parallel outputs, using rugged EtherCon connectors and standard Cat-5e cables. The A-16D Pro provides isolated (floating ground) DC power through the eight A-Net Outs; the ninth output is an unpowered A-Net Thru connector, designed for distributing a copy of the A-Net signal to a second A-Net Distributor or remote location.
As with all Aviom personal mixing systems, this six-mix package can be expanded as needed to include more Personal Mixers at any time.
Mix6 Technical Specifications
Specs
|
AN-16/i v.2 Input Module
|
| Audio Inputs |
16, balanced line-level, 1/4-inch TRS connector |
| Inputs |
Tip: Audio +; Ring: Audio -; Sleeve: Ground |
| TRS Thru |
Impedance matched output |
| Analog to Digital Conversion |
48kHz sample rate, 24 bit |
| Frequency Response |
4Hz-22kHz |
| A- Net In |
One Category 5 (RJ45 connector)
Four-position slot range selector switch for use with Pro16e A-Net |
| A-Net Out |
One Category 5 (RJ45 connector)
Supports Pro16 and Pro16e |
| Gain Settings |
Four-position switch, -10dBv, 0dBu, +4dBu, and +22dBu |
| Channel LED Indicators |
Signal Present and Clip, per channel |
| Line Inputs |
Impedance: 48k ohms |
| Metering |
LEDs; green: Signal Present, red: Clip; per channel |
| Stereo Operation |
Stereo Link, per channel pair;
Two-position switch (Normal, Link) |
| Maximum Input Level |
+22dBu |
| Input Impedance |
17.8k ohm |
| Freq. Response |
4Hz-22kHz +0.2dB/-3dB |
| THD +N |
< 0.003% |
| Crosstalk |
-90dB |
| Bit Error Rate (BER) |
10(-12) |
| Signal to Noise (unweighted) |
90dB typical, A/D to D/A
Measured from AN-16/i to AN-16/o Output Module |
| Digital Outputs |
A-Net: 1; RJ45 connector |
| A-Net Pro16 and Pro16e |
Use unshielded Cat-5e UTP (or better) cable
|
| Latency |
<0.880 msec (measured from analog input to analog output) |
Power Supply
Input Voltage
Output Voltage
Plug Size |
External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
18-24 VDC, 0.5 amp
2 mm |
| Power |
18-24 VDC, 500mA |
| Dimensions |
19" (482.6 mm) wide x 5.75" (146 mm) deep;
1U high |
| Weight |
6.8 lb (3.08 kg) |
| Options |
AN-16SBR System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable |
|
A-16II Personal Mixer
|
| Audio Output |
1/4-inch TRS stereo, headphone or line level |
| Line/Headphone TRS Output |
Tip: Audio Left; Ring: Audio Right;Sleeve: Ground
Auto-detects mono plugs |
| A-Net Input/Output |
1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector) |
| Digital to Analog Conversion Bit Depth |
24 bit |
| Signal to Noise Ratio |
(Referenced to 0dB) -103dB |
| Latency |
<0.880 msec (measured from analog input to analog output) |
| Pro16 A-Net |
Uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices |
| Tone Controls |
Treble +/-12dB at 9kHz shelving |
| Bass +/-12dB at 160Hz shelving |
| Maximum Levels (RMS) |
Line/Headphone outs: 1.0 watt at 100 ohms |
| Impedance |
Line/Headphone outs: 32 ohms |
Power Supply
Input Voltage
Output Voltage
Plug Size |
External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
18-24 VDC, 0.5 amp
2 mm |
| Dimensions |
10.75" (273 mm) wide x 5.6" (142.2 mm) deep;
2.25" (57.5 mm) high |
| Weight |
3.4 lbs. (1.54 kg) |
| Options |
MT-1 or MT-1a Mic Stand Mount |
| EB-1 Extension Bracket |
| MT-X Expansion Box (requires MT-1) |
| PS-120 Power Supply |
|
A-16D Pro A-Net Distributor
|
| A-Net Input |
One EtherCon RJ45 connector |
| A-Net Thru |
One EtherCon RJ45 connector, unpowered |
| A-Net Outputs |
8 EtherCon RJ45 connectors, powered (DC) |
| LEDs |
Power On; A-Net Active |
| Pro16 A-Net |
16 channels of digital audio over Cat-5e cable |
| Uses unshielded Cat-5e UTP (or better) cable |
| Power Supply |
Internal, universal switching type |
| Cooling |
One ultra-quiet fan |
| Input Voltage |
100-240VAC, 50-60Hz, 60W |
Output Voltage for
Personal Mixers |
18-24 VDC, 0.5 amp |
| Transmitted over the Cat-5e cable |
| Dimensions |
19" (482.6 mm) wide x 14.25" (362 mm) deep; 2U,
3.5" (88.9 mm) high |
| Weight |
12.0 lbs (5.44 kg) |
