Aviom Mix6Y Six-Mix Personal Mixing System for Yamaha
The Mix6Y Personal Mixing System is designed specifically for use with Yamaha® digital consoles; it's a complete monitor mixing solution for six performers. The included Y1 card easily connects to any open MY expansion slot on the Yamaha console. Assign the console's direct outs, aux sends, groups, or busses to the 16 channels of the Y1 card from the Yamaha user interface.
Run the included Cat-5e cable from the Y1 card to the A-16D Pro A-Net Distributor which copies and splits the digital signal while at the same time adding DC power to each of its eight outputs.
Connecting a Cat-5e cable from the A-16D Pro to each A-16II Personal Mixer is all that is necessary to complete the setup; the mixers get their power over the same cable that delivers the 16-channel digital signal. Plug headphones, ear buds, or a wireless in-ear monitoring system into the Personal Mixer and you're ready to start creating custom mixes.
The Mix6Y Personal Mixing System is designed specifically for use with Yamaha® digital consoles; it's a complete monitor mixing solution for six performers. The included Y1 card easily connects to any open MY expansion slot on the Yamaha console. Assign the console's direct outs, aux sends, groups, or busses to the 16 channels of the Y1 card from the Yamaha user interface.
Run the included Cat-5e cable from the Y1 card to the A-16D Pro A-Net Distributor which copies and splits the digital signal while at the same time adding DC power to each of its eight outputs.
Connecting a Cat-5e cable from the A-16D Pro to each A-16II Personal Mixer is all that is necessary to complete the setup; the mixers get their power over the same cable that delivers the 16-channel digital signal. Plug headphones, ear buds, or a wireless in-ear monitoring system into the Personal Mixer and you're ready to start creating custom mixes.
Video Tutorials
Mix6Y ()
- Monitor Mixing
- Digital Snakes
- Audio Networking
Product Details
The Mix6Y allows users of Yamaha® digital consoles a simple way to add Aviom's industry standard monitor mixing solution. The Aviom16/o-Y1 A-Net Card eliminates the need for an analog input module when creating a personal mixing system, providing a direct digital interface between Yamaha digital products and Aviom's Pro16® Series Personal Mixers. Configuration of the 16 input sources for the monitoring system can be done digitally from the Yamaha console's user interface. Any audio source that the console operator can configure and patch to an output may be sent into the monitor system.
The 16-channel A-16II Personal Mixer allows a performer to create and save up to 16 custom mixes, and gives each performer control over channel volume, grouping, pan, stereo spread, along with master volume and tone. The system also includes an MT-1a for each Personal Mixer to allow the personal mixer to be mounted on any standard mic stand.
The A-16D Pro A-Net Distributor eliminates the need to daisy chain Personal Mixers, and simplifies setup by eliminating the need to connect a power supply to each mixer. The A-16D Pro accepts one Pro16 A-Net input signal and provides nine parallel outputs, using rugged EtherCon connectors and standard Cat-5e cables. The A-16D Pro provides isolated (floating ground) DC power through the eight A-Net Outs; the ninth output is an unpowered A-Net Thru connector, designed for distributing a copy of the A-Net signal to a second A-Net Distributor or remote location.
As with all Aviom personal mixing systems, this six-mix package can be expanded as needed to include more Personal Mixers at any time.
Yamaha Product Compatibility
The Y1 card fits into any available MY expansion slot and is compatible with all Yamaha consoles and mix engines that support the Mini-YGDAI format, including:
Model |
|
|
MY Slots |
AW4416 |
|
|
2 |
AW2816 |
|
|
1 |
AW2400 |
|
|
1 |
PM1D (DIO8) * |
|
|
8 |
DM2000 |
|
|
6 |
02R96 |
|
|
4 |
DM1000 |
|
|
2 |
01V96 |
|
|
1 |
DME24N |
|
|
1 |
DME64N |
|
|
4 |
PM5D/PM5D-RH |
|
|
4 |
M7CL |
|
|
3 |
LS9-16 |
|
|
1 |
LS9-32 |
|
|
2 |
CL1 |
|
|
3 |
CL3 |
|
|
3 |
CL5 |
|
|
3 |
* The PM1D operates in 8-channel mode (MY8) only
Mix6Y Technical Specifications
Specs {C}
Aviom16/o-Y1 A-Net Card for Yamaha
|
A-Net Pro16 Output |
16 channels of A-Net digital data;
* 8 channels on PM1D |
Interface Format |
Yamaha mini-YGDAI (MY) Expansion Card |
Maximum Expansion |
Limited only by the number of available MY expansion slots in the digital mixer |
Sample Rate |
44.1kHz to 48kHz, +/-10% |
Digital Conversion |
24-bit |
A-Net Output |
A-Net Out: 1; EtherCon® RJ45 connector |
DIP Switch |
Switch 1-8: Stereo Link on/off
Switch 9-10: A-Net mode
A-Net Modes: 8-channel, 16-channel, Aviom, Test |
A-Net Pro16 |
A-Net allows 16 channels of audio to be transmitted over one Cat-5e cable
Use unshielded Cat-5e UTP (or better) cable;
Max. length 500 feet (150m) between devices |
Latency |
<0.880 msec (measured from analog input to
analog output) |
Power Supply |
None required;
Uses the Yamaha host device as source of power |
Dimensions |
4.75" (120.7 mm) wide x 6.25" (158.8 mm) deep; 1.5" (38.1 mm) high |
Weight |
0.8 lbs (0.36 kg) |
{C}
{C}
A-16II Personal Mixer
|
Audio Output |
1/4-inch TRS stereo, headphone or line level |
Line/Headphone TRS Output |
Tip: Audio Left; Ring: Audio Right;Sleeve: Ground
Auto-detects mono plugs |
A-Net Input/Output |
1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector) |
Digital to Analog Conversion Bit Depth |
24 bit |
Signal to Noise Ratio |
(Referenced to 0dB) -103dB |
Latency |
<0.880 msec (measured from analog input to analog output) |
Pro16 A-Net |
Uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices |
Tone Controls |
Treble +/-12dB at 9kHz shelving |
Bass +/-12dB at 160Hz shelving |
Maximum Levels (RMS) |
Line/Headphone outs: 1.0 watt at 100 ohms |
Impedance |
Line/Headphone outs: 32 ohms |
Power Supply
Input Voltage
Output Voltage
Plug Size |
External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
18-24 VDC, 0.5 amp
2 mm |
Dimensions |
10.75" (273 mm) wide x 5.6" (142.2 mm) deep;
2.25" (57.5 mm) high |
Weight |
3.4 lbs. (1.54 kg) |
Options |
MT-1 or MT-1a Mic Stand Mount |
EB-1 Extension Bracket |
MT-X Expansion Box (requires MT-1) |
PS-120 Power Supply |
{C}
{C}
A-16D Pro A-Net Distributor
|
A-Net Input |
One EtherCon RJ45 connector |
A-Net Thru |
One EtherCon RJ45 connector, unpowered |
A-Net Outputs |
8 EtherCon RJ45 connectors, powered (DC) |
LEDs |
Power On; A-Net Active |
Pro16 A-Net |
16 channels of digital audio over Cat-5e cable |
Uses unshielded Cat-5e UTP (or better) cable |
Power Supply |
Internal, universal switching type |
Cooling |
One ultra-quiet fan |
Input Voltage |
100-240VAC, 50-60Hz, 60W |
Output Voltage for
Personal Mixers |
18-24 VDC, 0.5 amp |
Transmitted over the Cat-5e cable |
Dimensions |
19" (482.6 mm) wide x 14.25" (362 mm) deep; 2U,
3.5" (88.9 mm) high |
Weight |
12.0 lbs (5.44 kg) |
{C}
{C}
MT-1a Mic Stand Mount
|
Boxed Weight |
1 lb |
Boxed Dimensions |
7"w x 5"d x 3"h |
Dimensions |
6.25" wide at front x 4.5" wide at rear x 3" high |
Connections: |
Attaches with three screws to bottom of an A360 A-16II, or A-16CS |
Connectors: |
Size: 6-32, 1/4-inch long screws |
{C}
Video Tutorials
Mix6Y ()
- Monitor Mixing
- Digital Snakes
- Audio Networking
Product Details
The Mix6Y allows users of Yamaha® digital consoles a simple way to add Aviom's industry standard monitor mixing solution. The Aviom16/o-Y1 A-Net Card eliminates the need for an analog input module when creating a personal mixing system, providing a direct digital interface between Yamaha digital products and Aviom's Pro16® Series Personal Mixers. Configuration of the 16 input sources for the monitoring system can be done digitally from the Yamaha console's user interface. Any audio source that the console operator can configure and patch to an output may be sent into the monitor system.
The 16-channel A-16II Personal Mixer allows a performer to create and save up to 16 custom mixes, and gives each performer control over channel volume, grouping, pan, stereo spread, along with master volume and tone. The system also includes an MT-1a for each Personal Mixer to allow the personal mixer to be mounted on any standard mic stand.
The A-16D Pro A-Net Distributor eliminates the need to daisy chain Personal Mixers, and simplifies setup by eliminating the need to connect a power supply to each mixer. The A-16D Pro accepts one Pro16 A-Net input signal and provides nine parallel outputs, using rugged EtherCon connectors and standard Cat-5e cables. The A-16D Pro provides isolated (floating ground) DC power through the eight A-Net Outs; the ninth output is an unpowered A-Net Thru connector, designed for distributing a copy of the A-Net signal to a second A-Net Distributor or remote location.
As with all Aviom personal mixing systems, this six-mix package can be expanded as needed to include more Personal Mixers at any time.
Yamaha Product Compatibility
The Y1 card fits into any available MY expansion slot and is compatible with all Yamaha consoles and mix engines that support the Mini-YGDAI format, including:
Model |
|
|
MY Slots |
AW4416 |
|
|
2 |
AW2816 |
|
|
1 |
AW2400 |
|
|
1 |
PM1D (DIO8) * |
|
|
8 |
DM2000 |
|
|
6 |
02R96 |
|
|
4 |
DM1000 |
|
|
2 |
01V96 |
|
|
1 |
DME24N |
|
|
1 |
DME64N |
|
|
4 |
PM5D/PM5D-RH |
|
|
4 |
M7CL |
|
|
3 |
LS9-16 |
|
|
1 |
LS9-32 |
|
|
2 |
CL1 |
|
|
3 |
CL3 |
|
|
3 |
CL5 |
|
|
3 |
* The PM1D operates in 8-channel mode (MY8) only
Mix6Y Technical Specifications
Specs
Aviom16/o-Y1 A-Net Card for
|