Shure Beta 27 Side Address Condenser Microphone

Brand: Shure
Product Code: Beta 27
Availability: In Stock

Price: $399.00

Qty: - OR - Add to Wish List
Add to Compare

Description Reviews (0) Related Products (9)

MSRP: ~~$499.00~~ You save $100.00 at NorrisAV.com!

The Beta 27 side-address condenser microphone is precision engineered for professional sound reinforcement and project studio recording applications. Its flat frequency response and low self-noise provide unerring performance in demanding environments. A tight supercardioid pattern ensures high gain-before-feedback and maximum isolation from other sound sources.

FEATURES:

Supercardioid polar pattern specifically targets the sound source consistently with greatly minimized bleed from off-axis sound sources
Tailored for superior transient response from a low-mass, 1” externally-biased, ultra-thin 24 Karat gold-layered Mylar® diaphragm
Flat, neutral frequency response for natural reproduction on stage or in the studio
3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended lowend

-15 dB switchable attenuator handles extremely high SPLs with ease
Premium electronic components and gold-plated internal and external connectors
Internal pop filter with three separate mesh layers reduces wind and breath noise.

SPECIFICATIONS:

Type

Condenser (externally biased)

Frequency Response: 20 to 20,000 Hz
Polar Pattern: Supercardioid
Impedance: 160 Ohms
Sensitivity (at 1 kHz, open circuit voltage): -37 dBV/Pa; 1 Pascal=94 dB SPL
Maximum SPL (1 kHz at 1% THD): 1000 Ohm load: 134 dB (148 dB, Pad on); 2500 Ohm load: 140 dB (154 dB, Pad on)
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 85.5 dB; S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
Dynamic Range (at 1 kHz): 1000 Ohm load: 125.5 dB; 2500 Ohm load: 131.5 dB

Common Mode Rejection (20 Hz to 20 kHz): > 50 dB
Clipping Level (20Hz-20 kHz at 1% THD): 1000 Ohm load: 2.0 dBV; 2500 Ohm load: 8.5 dBV; THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL
Self Noise (typical, equivalent SPL, A-weighted): 8.5 dB
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Weight: Net: 428 g (15.1 oz.)
Switch: Attenuator: -15 dB; Low Frequency Response: flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz
Connector: Three-pin professional audio (XLR), male
Power Requirements: 48 Vdc phantom, 5.6 mA

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue

Shopping Cart

Shure Beta 27 Side Address Condenser Microphone

Write a review

Information

Customer Service

Extras

Account